Oil flow separation patterns on an ogive forebody
نویسندگان
چکیده
منابع مشابه
In-line Oil-water Separation in Swirling Flow
An in-line oil-water separator has been designed and is investigated for singleand two-phase flow. Numerical single-phase flow results show an annular reversed flow region. This flow pattern agrees qualitatively with results from measurements. In the two-phase flow simulations two different drag laws have been used to model the interaction between the phases. The velocity field of the singleand...
متن کاملPulsed-Discharge Flow Control over a Conical Forebody
Duty cycle modulation of the alternating blowing from two opposite facing plasma actuators on the leeward surface near the apex of a cone of semi-apex angle 10o to control the mean lateral force and moment and the flow control mechanism are presented. The pressure distributions over the cone forebody are measured by steady and unsteady pressure-transducers. The experiments are performed in a 3....
متن کاملPIV Study of Conical Forebody Flow Control Using Plasma Actuators
Duty cycle modulation of the alternate blowing from two opposite facing plasma actuators on the leeward surface near the apex of a cone having semi-apex angle of 10° to control the mean lateral force, moment and the flow control mechanisms are presented. The pressure distributions over the cone forebody are measured using steady pressure-tappings. The flowfields are visualized by a two-dimensio...
متن کاملComputational Investigation Of Slot Blowing For Fuselage Forebody Flow Control
This paper presents a computational investigation of a tangential slot blowing conccpt for generating lateral control forces on an aircraft fuselage forcbody. The effects of varying both the jet width and jet exit velocity for a fixed location slot are analyzed. This work is aimcd at aiding rrscarchcrs in designing future experimental and compm tational models of tangential slot blowing. The pr...
متن کاملFlow Control over Conical Forebody with Port Pulsed Plasma Actuator
A study using plasma port single-pulsed discharge is performed on the flow control of asymmetrical vortices over slender conical forebody. The different circumferential steady and unsteady pressure distributions are measured in the wind tunnel test. At the same time, the local side force, the increment of local side force and the overall side force and moment are calculated with the circumferen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: AIAA Journal
سال: 1983
ISSN: 0001-1452,1533-385X
DOI: 10.2514/3.8112