ON NATURAL FREQUENCIES OF A SEILENT STRUCTURE
نویسندگان
چکیده
منابع مشابه
the structure of lie derivations on c*-algebras
نشان می دهیم که هر اشتقاق لی روی یک c^*-جبر به شکل استاندارد است، یعنی می تواند به طور یکتا به مجموع یک اشتقاق لی و یک اثر مرکز مقدار تجزیه شود. کلمات کلیدی: اشتقاق، اشتقاق لی، c^*-جبر.
15 صفحه اولA numerical investigation into the crack effects on the natural frequencies of the plates
In the current study, the effect of such parameters as the length, position and angle of crack on free vibrations of a cracked plate was examined by finite element method. The assumed crack was internal and through and its growth was ignored. In the proposed finite element model, crack was considered as a discontinuity on the plate surface and the results were compared with the results of other...
متن کاملStudy of the Effects of Lacing Rods Location on Natural Frequencies in Last Stage Blades of a Steam Turbine
In this study, effects of lacing rods location on natural frequencies of last stage of a Steam Turbine Blades (STBs) have been investigated. STBs are critical and important elements in a turbine as well as power plants. One of the most important parameters in turbine blades is lacing rods location. In this paper, first, a three dimensional (3D) scan was used to produce the geometrical model of ...
متن کاملThe Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System
In this paper, the effectiveness of stiffness and damping of bearing is investigated on the natural frequencies of the rotor-bearing system. The rotor-bearing system consists of a shaft, two bearings and a disk between two bearings. Parallel spring-damper in horizental and vertical directions is considered for modeling the stiffness and damping of bearings. The gyroscopic effect is also conside...
متن کاملStiffener layout optimization to maximize natural frequencies of a structure: application to HDD cover structure
Beam-type stiffeners have frequently been used for raising natural frequencies of baseline structures. In stiffener layout optimization problems, most of the previous researches considering the position and/or the length of the stiffener as design variables dealt with structures having just simple convex shapes such as a square or a rectangle. The reason was because concave shape structures hav...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1965
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.113.0_12