On Surface Finish Produced by Ceramic Tools
نویسندگان
چکیده
منابع مشابه
Surface Finish Produced on 5 Aesthetic Restorative Materials by New Polishing Systems
Objective: The purpose of this study was to investigate the surface finish of 5 different aesthetic restorative materials after polishing with 3 different polishing systems. Materials and Method: The materials included 2 nano-filled composites (Tetric Evo Ceram and Grandio), a compomer (Compoglass F), a resin-modified glass ionomer cement (Fuji II LC), and a highly viscous glass-ionomer cement ...
متن کاملSurface Finish
Q.1. What factors govern the selection of a particular cleaning process for metallic surfaces Ans. Selection of cleaning process is mainly influenced by (a) Type of contaminants (b) Degree of cleanliness required (c) Composition of metal (d) Condition of metal (e) Thickness of rust and scale (f) Allowable metal loss (g) Surface finish tolerances (h) Shape and size of workpieces (i) Production r...
متن کاملMethods to Improve Surface Finish of Parts Produced by Fused Deposition Modeling
Fused deposition modeling (FDM) is one of the rapid prototyping technologies that can use plastic material, which can be effectively used for making patterns for investment casting. The surface finish of the investment casting depends upon the surface finish of the pattern. But the surface finish of the parts produced by using FDM is not very good as compared to wax patterns, which are conventi...
متن کاملPrediction of Surface in Machining by Flat and Spherical Surface Tools
In this paper, the profile of surfaces machined using end mills with flat and ball end tools in modeled. The real kinematics of the tool motion, the static deflection and the run out of the tool are included in the model. The cutting forces are calculated using a semi-empirical method based on orthogonal to oblique conversion of cutting coefficients. The thickness of the uncut chip is used as t...
متن کاملOptical Effect of Surface Finish by Single Point Diamond Machining
Although ultraprecision diamond turned optics can have surface roughness down to tens of nanometers or even lower, they may still contain defects due to machining process variations. Diamond turned surfaces have been carefully studied before [3-12]. The previous research however was mainly focused on the causes of the surface texture and one of the main goals of these studies was to improve the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of JSME
سال: 1961
ISSN: 0021-3764,1881-1426
DOI: 10.1299/jsme1958.4.365