On the design of airfoils having no boundary layer separation

Boundary Layer Separation and Reattachment Detection on Airfoils by Thermal Flow Sensors

A sensor concept for detection of boundary layer separation (flow separation, stall) and reattachment on airfoils is introduced in this paper. Boundary layer separation and reattachment are phenomena of fluid mechanics showing characteristics of extinction and even inversion of the flow velocity on an overflowed surface. The flow sensor used in this work is able to measure the flow velocity in ...

Boundary Layer Trips on Airfoils at Low Reynolds Numbers

Three categories of boundary layer trips (single 2-D plain. multiple 2-D plain, and 3-D trips) were tested on the l\106-13-128, E374, and SD7037 airfoils over t he Reynolds numbers of 100,000 to 300,000. Flow visualization and drag data were acquired for a number of trip heights and locations. To facilitate comparisons between airfoils, t rips were located relative to untripped laminar separati...

Turbulent Boundary-Layer Separation

This article summarizes our present understanding of the physical behavior of two-dimensional turbulent separated flows, which occur due to adverse pressure gradients around streamlined and bluff bodies. The physical behavior of turbulence is flow dependent, so detailed experimental infor­ mation is needed for understanding such flows and modeling their physics for calculation methods. An earli...

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

Localization of atheroma: a theory based on boundary layer separation.