On the Pearlite Transformation of Ni-Cr-Mo Steel
نویسندگان
چکیده
منابع مشابه
Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel
This paper shows cxpcrinicn~~~l results concerning thc lnartcnsitic transcormation and the transfor1nation-in(i~1cc(I plasticity undcr multinsial loading. The matcrial investigated is a Cr-Ni-Mo-Al-Ti steel, which is suhrnitlcd to :I y--)cr.' nlartcnsitic phasc: transformation undcr an applicd strcss. The specimens are thin tubes loadcd in ~cnsion-~orsion. The ~csts wcrc specially dcsigncd to p...
متن کاملMechanism of Bainite Transformation in Fe-Cr-Mo-V-Ti-C Steel
The kinetics and mechanism of bainite transformation have been studied in Fe-Cr-Mo-V-Ti-C steel high speed dilatometry backed by thermodynamic analysis. The complete transformation of austenite, however, has not occurred at any reported temperature. Obtained results confirm the incomplete reaction phenomenon with the cessation of the bainite transformation well before the paraequilibrium is ach...
متن کاملSimulating the Heat Treatment Process of the Shell Liner of Cr-Mo Steel
The aim of the present research is to simulate the heat treatment process of the autogenous grinding (AG) shell liner of Cr-Mo steel in different quenching media (still air, air blowing, oil and water) using ABAQUS software, in order to calculate the cooling curves. In this regard, the microstructure and hardness for each arbitrary point within the mill liner's bulk could be predicted based on ...
متن کاملThe Role of Alloying Elements on the Crevice Corrosion Behavior of Ni-Cr-Mo Alloys
The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...
متن کاملNanoscale Cellular Structures at Phase Boundaries of Ni-Cr-Al-Ti and Ni-Cr-Mo-Al-Ti Superalloys
The microstructural evolution of Ni-20 pct Cr wires was studied during pack cementation where Al and Ti, with and without prior cementation with Mo, are deposited to the surface of the NiCr wires and subsequently homogenized in their volumes. Mo deposition promotes the formation of Kirkendall pores and subsequent co-deposition of Al and Ti creates a triple-layered diffusional coating on the wir...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1961
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.25.10_647