On the thermo-flow behavior in a rectangular channel with skewed circular ribs
نویسندگان
چکیده
منابع مشابه
Investigation of the thermo-hydraulic behavior of the fluid flow over a square ribbed channel
The thermo-hydraulic behavior of the air flow over a two dimensional ribbed channel wasnumerically investigated in various rib-width ratio configurations (B/H=0.5-1.75) atdifferent Reynolds numbers, ranging from 6000 to 18000. The capability of differentturbulence models, including standard k-ε, RNG k-ε, standard k-ω, and SST k-ω, inpredicting the heat transfer rate was compared with the experi...
متن کاملinvestigation of the thermo-hydraulic behavior of the fluid flow over a square ribbed channel
the thermo-hydraulic behavior of the air flow over a two dimensional ribbed channel wasnumerically investigated in various rib-width ratio configurations (b/h=0.5-1.75) atdifferent reynolds numbers, ranging from 6000 to 18000. the capability of differentturbulence models, including standard k-ε, rng k-ε, standard k-ω, and sst k-ω, inpredicting the heat transfer rate was compared with the experi...
متن کاملMixed Convection Flow in a Rectangular Ventilated Cavity with a Heat Conducting Solid Circular Cylinder at the Center
A numerical investigation has been carried out for mixed convection flow in a rectangularventilated cavity with a heat conducting solid circular cylinder at the center. Forced convection flowconditions were imposed by providing an inlet at the bottom of the left wall and an outlet vent at the topto the other sidewall. In this paper, the effect of cavity aspect ratio as well as the mixed convect...
متن کاملeffect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولThermo-hydrodynamics of Developing Flow in a Rectangular Mini-channel Array
Thermo-hydrodynamic performance of hydrodynamically and thermally developing single-phase flow in an array of rectangular mini-channels has been experimentally investigated. The array consists of fifteen rectangular parallel mini-channels of width 1.1±0.02 mm, depth 0.772±0.005 mm (hydraulic diameter 0.907 mm), inter-channel pitch of 2.0 mm, machined on a copper plate of 8.0 mm thickness and ha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics & Industry
سال: 2017
ISSN: 2257-7777,2257-7750
DOI: 10.1051/meca/2016057