On Various Porous Scaffold Fabrication Methods

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Solid Freeform Fabrication of Calcium Polyphosphate Dual- Porous Structure Osteochondral Scaffold

In this work the solid freeform fabrication (SFF) of dual-porous structure scaffolds using the 3D-printing method is investigated. The structure, including a cartilage substrate and a bone scaffold with different porosities and pore sizes, provide a suitable facility for repairing the osteochondral tissues in the implanted site. Calcium polyphosphate (CPP), with distinct particle sizes for each...

متن کامل

Fabrication of porous particulate for the scaffold by applying solution spraying method.

A simple and novel method--in the form of solution spraying--was developed to fabricate biodegradable, porous poly(L-lactic acid) (PLLA) particulates for scaffold. PLLA pellets were dissolved in an organic solvent. Then, 5 % PLLA-dioxane solution was sprayed using an air-assisted atomizer with a nozzle diameter of 2.5 mm at an air flow rate of 15 L/min. After the sprayed solution solidified in ...

متن کامل

Solid-state cryomilling for porogen mixing and porous scaffold fabrication - biomed 2011.

Several widely used techniques for the fabrication of three dimensional (3D) scaffolds utilize the particulate leaching method to achieve a porous structure. This method involves the selective leaching of a mineral or an organic compound to generate pores. However, scaffolds prepared by this technique tend to exhibit limited interconnectivity. Therefore, to enhance the interconnectivity of the ...

متن کامل

Hydrothermal Fabrication of Highly Porous Titanium Bio-Scaffold with a Load-Bearable Property

Porous titanium (P_Ti) is considered as an effective material for bone scaffold to achieve a stiffness reduction. Herein, biomimetic (bio-)scaffolds were made of sintered P_Ti, which used NaCl as the space holder and had it removed via the hydrothermal method. X-ray diffraction results showed that the subsequent sintering temperature of 1000 °C was the optimized temperature for preparing P_Ti. ...

متن کامل

Conceptual Design and Fabrication of Porous Structured Scaffold for Tissue Engineering Applications

Today, organ and tissue transplantation remains one of the most important while complex options in order to restore or enhance life expectancy. Though it is a complex option, it is more preferable than other restorations due to its high success rate. The organ and tissue transplantation bring about the idea to generate bone scaffolds using natural bone like materials to treat bone losses, fract...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Mapana - Journal of Sciences

سال: 2017

ISSN: 0975-3303,0975-3303

DOI: 10.12723/mjs.43.5