One exposure processing to fabricate spiral phase plate with continuous surface
نویسندگان
چکیده
منابع مشابه
Heat transfer enhancement in a spiral plate heat exchanger model using continuous rods
This study presents an innovative and simple way to increase the rate of heat transfer in a spiral plate heat exchanger model. Several circular cross-section rods, as continuous vortex generators, have been inserted within the spiral plate heat exchanger in the cross-stream plane. The vortex generators are located at various azimuth angles of α=30◦, 60◦, 90◦, and 120◦ with non-dimensional diame...
متن کاملRay transfer matrix for a spiral phase plate.
We present a ray transfer matrix for a spiral phase plate. Using this matrix we determine the stability of an optical resonator made of two spiral phase plates and trace stable ray orbits in the resonator. Our results should be relevant to laser physics, optical micromanipulation, quantum information, and optomechanics.
متن کاملUsing UV roll-to-plate imprint lithography to fabricate light guide plates with microdot patterns
Conventional methods used to fabricate the light guide plates (LGPs), such as injection molding and hot embossing, are difficult and unsuitable. In this study, the authors propose a new manufacturing process for the roll-to-plate UV imprint lithography (RPIL) technique that fabricates LGPs with dot patterns. A flexible and transparent sheet mold with microstructures required by the RPIL machine...
متن کاملGelcasting as a Novel Processing Route to Fabricate Partially Stabilized Zirconia Ceramic Bodies
Bioinert ceramics, like alumina and zirconia are used mainly for replacements of bones, hip joints and for dental implants. Partially stabilized zirconia ceramics (PSZ or TZP with 3 mol.% or 5 wt.% Y2O3), appear as perspective bioinert ceramics because of their high strength and corrosion resistance. In order to fabricate complex shapes, it is essential to use a near ...
متن کاملDepth Enhancement of Optical Scanning Holography with a Spiral Phase Plate
A spiral phase plate is applied to the optical scanning holography system to improve the depth resolution of the reconstruction, the simulation results show that the depth interval can be resolved at a 0.4 μm with only a single hologram. OCIS codes: 100.3190, 110.1758. 1. Theory Optical scanning holography (OSH) is a technique that records the holographic information of a three-dimensional scen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2015
ISSN: 1094-4087
DOI: 10.1364/oe.23.008620