One‐Pot, Three‐Phase Recycling of Metals from Li‐Ion Batteries in Rotating, Concentric‐Liquid Reactors (Adv. Mater. 29/2023)
نویسندگان
چکیده
Battery Recycling In article number 2211946, Bartosz A. Grzybowski and co-workers present a one-pot separation of metals from spent lithium-ion batteries. Three liquid layers occupy different segments the rotating cylindrical vessel are intensely stirred to move selected components between layers. only ten minutes, all cobalt manganese migrate feed acceptor layer (red), while lithium nickel remain in processed (green).
منابع مشابه
Recycling of Precious Metals from E-scrap
Recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and refinery operations. At the end of their use, electronic and other electrical product scrap offer an important recycling potential for the secondary supply of gold and silver...
متن کاملClosed-loop Recycling of Nickel, Cobalt and Rare Earth Metals from Spent Nickel-metal Hydride- Batteries
Nickel-metal hydride batteries (Ni-MH) are storers of electrochemical energy, which have a higher specific storage capacity than lead or nickel-cadmium batteries. The demand for Nickel-metal hydride batteries is increasing rapidly since their market launch in the early 1990's. Today there is no suitable and sustainable recycling process to recover nickel, cobalt and rare-earth metals. The disca...
متن کاملrecycling of precious metals from e-scrap
recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and refinery operations. at the end of their use, electronic and other electrical product scrap offer an important recycling potential for the secondary supply of gold and silver int...
متن کاملMetamaterials: Snapping Mechanical Metamaterials under Tension (Adv. Mater. 39/2015).
By exploiting snap-through instabilities, D. Pasini and co-workers design a damage-tolerant mechanical metamaterial that snaps sequentially under tension, thereby accommodating a very large deformation up to 150%. On page 5931, they describe how the nonlinear mechanical response of the metamaterial can be robustly programmed by tuning the architecture of its unit cell.
متن کاملElectrochemical Membrane Reactors for Sustainable Chlorine Recycling
Polymer electrolyte membranes have found broad application in a number of processes, being fuel cells, due to energy concerns, the main focus of the scientific community worldwide. Relatively little attention has been paid to the use of these materials in electrochemical production and separation processes. In this review, we put emphasis upon the application of Nafion membranes in electrochemi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials
سال: 2023
ISSN: ['1521-4095', '0935-9648']
DOI: https://doi.org/10.1002/adma.202370202