Open‐phase fault tolerant driving operation of dual‐inverter‐based traction drive
نویسندگان
چکیده
منابع مشابه
Experimental fault-tolerant control of a PMSM drive
The paper describes a study and an experimental verification of remedial strategies against failures occurring in the inverter power devices of a permanent-magnet synchronous motor drive. The basic idea of this design consists in incorporating a fourth inverter pole, with the same topology and capabilities of the other conventional three poles. This minimal redundant hardware, appropriately con...
متن کاملAnalysis of the fault tolerant induction motor drive system
In the paper the influence of the chosen sensors faults (rotor speed and stator current sensors) to the properties of vector controlled induction motor drive system are tested. Faults detection algorithms based on the simple signals from internal control structure are developed. The simulation tests carried out in Matlab/SimPowerSystem software. The proposed solution can be successfully applied...
متن کاملA New Design of Fault Tolerant Comparator
In this paper we have presented a new design of fault tolerant comparator with a fault free hot spare. The aim of this design is to achieve a low overhead of time and area in fault tolerant comparators. We have used hot standby technique to normal operation of the system without interrupting and dynamic recovery method in fault detection and correction. The circuit is divided to smaller modules...
متن کاملFault-Tolerant Operation of Single-Phase SR Generators
This paper studies fault-tolerant operation of multipole single-phase switched reluctance generators (SRG’s), in particular, an 8/8-pole switched reluctance machine. The multipole single-phase SRG system is advantageous for reduced cost and higher efficiency compared to polyphase equivalents. However, using the classical phase-leg topology, a phase fault may prevent generating operation complet...
متن کاملFault-tolerant for Electric Vehicles Drive System Sensor Failure
Abstract When EV failure happens, it needs to take some fault-tolerant method to ensure people’s safety. When the current sensor and speed sensor are out of work, the software fault-tolerant control algorithm switching strategy can be used. This paper has done theoretical analysis of the rotor field-oriented vector control algorithm into the open loop constant V/F control algorithm, and the pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IET Electric Power Applications
سال: 2021
ISSN: 1751-8660,1751-8679
DOI: 10.1049/elp2.12067