Operational Modal Analysis of Francis Turbine Runner Blades Using Transient Measurements
نویسندگان
چکیده
منابع مشابه
Optimization of GAMM Francis Turbine Runner
Nowadays, the challenge in hydraulic turbine design is the multi-objective design of turbine runner to reach higher efficiency. The hydraulic performance of a turbine is strictly depends on runner blades shape. The present paper focuses on the application of the multi-objective optimization algorithm to the design of a small Francis turbine runner. The optimization exercise focuses on the effic...
متن کاملA Fatigue Analysis of a Hydraulic Francis Turbine Runner
In this work, the estimation of crack initiation life of a hydraulic Francis turbine runner is presented. The life prediction is based on the local strain approach to predict the initiation life. First, the analysis is carried out in air and in water condition and the runner’s natural frequencies were calculated using the finite element (FE) method. The analysis in air is compared with experime...
متن کاملModal Testing and Finite Element Analysis of Crack Effects on Turbine Blades
The study of vibration response of a turbine blade helps to detect the crack presence in the blade which alters its dynamic characteristics. The change is characterized by changes in the modal parameters associated with natural frequencies. In this paper, study of vibration response is made for turbine blade in the presence of a crack like defect. Turbine blade is initially assumed as a cantile...
متن کاملModelling of the Francis turbine runner in power stations. Part II: stress analysis
The second part of this paper presents results of stress analysis of the whole Francis turbine runner at Derbendikan power station by using the Finite Element Method (FEM). Computations were carried out with appropriate boundary and loading conditions for water pressure obtained from CFD analysis. The analysis focuses on stress distribution in the runner blades. It has been found that the maxim...
متن کاملOperational Modal Analysis of Wind Turbine Speed- increase Gearbox
Speed increase transmission gear box is the primary vibration and noise source of wind turbine, Operational modal method was adopted to collect impact data and response data of each point based on the gearbox test model. ANSYS finite element model is established to simulate the wind turbine gearbox. Then the modal frequencies of the two methods were compared to ensure the test model is correct....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2021
ISSN: 1755-1307,1755-1315
DOI: 10.1088/1755-1315/774/1/012082