Optical Coatings Prepared by the Sol-Gel Process.
نویسندگان
چکیده
منابع مشابه
Optical Constants of Crystallized TiO2 Coatings Prepared by Sol-Gel Process
Titanium oxide coatings have been deposited by the sol-gel dip-coating method. Crystallization of titanium oxide coatings was then achieved through thermal annealing at temperatures above 400 °C. The structural properties and surface morphology of the crystallized coatings were studied by micro-Raman spectroscopy and atomic force microscopy, respectively. Characterization technique, based on le...
متن کاملPolyacrylate/silica nanocomposite materials prepared by sol–gel process
Polyacrylate/silica nanocomposite was prepared by sol–gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), c-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanoco...
متن کاملContaminant Resistant Sol-Gel Coatings
Valerie Rapson Greece Olympia High School Advisor: Kenneth L. Marshall University of Rochester Laboratory for Laser Energetics Summer High School Research Program 2005 1. Abstract Sol-gel coatings are used on the OMEGA laser optics as anti-reflection (AR) coatings to maximize their transmittance. Over time, trace organic compounds in the laser bay contaminate these sol-gel coatings, reducing th...
متن کاملOptical sol-gel coatings : ellipsometry of film formation
2014 A method was developed to image an area of a drying, steady-state film during dip-coating using ellipsometry, thereby obtaining the film’s thickness and refractive index as a function of position. Measurements on TiO2 and SiO2 alcohol-based sols indicate that the film approaches a volume fraction 03A6 ~ 0.2 in the wet state and suggests that the film resists densifying further for kinetic ...
متن کاملOptical Properties of Titania Coatings Prepared by Inkjet Direct Patterning of a Reverse Micelles Sol-Gel Composition.
Thin layers of titanium dioxide were fabricated by direct inkjet patterning of a reverse micelles sol-gel composition onto soda-lime glass plates. Several series of variable thickness samples were produced by repeated overprinting and these were further calcined at different temperatures. The resulting layers were inspected by optical and scanning electronic microscopy and their optical propert...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 1996
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.24.27