OPTICAL CONSTANTS AND THEIR MEASUREMENT
نویسندگان
چکیده
منابع مشابه
Optical and magneto-optical constants of MnPt3
Optically thick films of MnPt 3 were deposited on quartz using dc magnetron sputtering. The films were covered with an SiO x protective overcoat and annealed in vacuum at 850 °C for 1 h to form the crystalline L1 2 ͑Cu 3 Au͒ cubic structure. These films have a high degree of long-range order and are highly textured with the ͑111͒ axis along the film normal. Variable angle spectroscopic ellipsometry...
متن کاملThickness and optical constants measurement of thin film growth with circular heterodyne interferometry
In this article, we report an alternative method for in situ monitoring of the thickness and refractive index of thin film during the growth process. We design a special structure with a thickness-controlled air film to simulate the process of thin film growth. The phase term of the reflected light coming from this multi-layer structure is modulated and has a strong correlation with the thickne...
متن کاملOptical constants of as-deposited and treated alkali halides, and their VUV quantum efficiency
The optical constants of thin films of CsI, KI, and KBr in the spectral range of 53.6-174.4 nm were obtained from the measurements of reflectivity as a function of the incidence angle. The effect of film heating to 420 K and exposure to UV radiation on the optical constants of the three materials was also investigated. The quantum efficiencies (QEs) of the planar photocathodes made with the thr...
متن کاملMonolithic Fabry-Perot resonator for the measurement of optical constants in the terahertz range
A prism-shaped monolithic Fabry-Perot resonator is shown to allow absorption measurements of liquid samples in the terahertz wave range. As the radiation source a backward-wave oscillator was chosen for its tunable, highly monochromatic, continuous wave. The resonator is made of high-resistivity silicon, with two surfaces acting as partial mirrors and forming the cavity, while a third one contr...
متن کاملOptical factors determined by the T-matrix method in turbidity measurement of absolute coagulation rate constants.
Turbidity measurement for the absolute coagulation rate constants of suspensions has been extensively adopted because of its simplicity and easy implementation. A key factor in deriving the rate constant from experimental data is how to theoretically evaluate the so-called optical factor involved in calculating the extinction cross section of doublets formed during aggregation. In a previous pa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Le Journal de Physique Colloques
سال: 1977
ISSN: 0449-1947
DOI: 10.1051/jphyscol:1977503