Optically active nano-glass-ceramic coatings of Nd3+ doped-80SiO2-20LaF3 prepared by the pre-crystallized nanoparticles sol-gel route

نویسندگان

چکیده

Transparent oxyfluoride glass-ceramic (OxGCs) coatings with composition 1.2Nd3+ 80SiO2- 20LaF3 were prepared following a sol-gel route labelled “pre-crystallized nanoparticles route”. OxGCs are transparent materials composed by one or more fluoride nanocrystals in glass matrix. have been encouraging results powders and bulk glass-ceramics but not coatings. In the present work, aqueous suspensions of LaF3 doped Nd3+ chemical then incorporated into silica sol to obtain doped-80SiO2-20LaF3 particulate sols. Nd3+-LaF3 characterized XRD, HRTEM, XRF revealing presence as unique crystalline phase. Then, -80SiO2-20LaF3 dip-coating FTIR, Ellipsometry. Photoluminescence measurements performed for coatings, confirming showing well-structured crystalline-like emission spectra lifetimes 520 440 µs respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

VISIBLE-LIGHT-ACTIVE NITROGEN DOPED TIO2 NANOPARTICLES PREPARED BY SOL-GEL ACID CATALYZED REACTION

Yellow-colored nitrogen doped TiO2 photocatalyst and a pure TiO2 powder were synthesized via sol-gel method using TiCl4 and urea as raw materials. However, the synthesis procedure for nitrogen doped TiO2 was catalyzed by acid that dialed with controlled precipitation and slow nucleation. According to XRD analysis, the nitrogen doped TiO2 consisted of anatase phase of titania which was a signifi...

متن کامل

Optical Constants of Crystallized TiO2 Coatings Prepared by Sol-Gel Process

Titanium oxide coatings have been deposited by the sol-gel dip-coating method. Crystallization of titanium oxide coatings was then achieved through thermal annealing at temperatures above 400 °C. The structural properties and surface morphology of the crystallized coatings were studied by micro-Raman spectroscopy and atomic force microscopy, respectively. Characterization technique, based on le...

متن کامل

Synthesis and Structural Properties of Bismuth Doped Cobalt Nano Ferrites Prepared by Sol-Gel Combustion Method

A series of Bismuth doped Cobalt nanoferrites of chemical composition CoBixFe2-xO4 (where x = 0.00, 0.05, 0.10, 0.15, 0.20 & 0.25) were prepared by sol-gel combustion method and calcinated at 600 ̊C. The structural and morphological studies were carried out by using X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy...

متن کامل

Preparation and characterization of bioactive glass nanoparticles prepared by sol-gel for biomedical applications.

Bioactive glass nanoparticles (BG-NPs), based on both ternary (SiO(2)-CaO-P(2)O(5)) and binary (SiO(2)-CaO) systems, were prepared via an optimized sol-gel method. The pH of preparation and the effect of heat treatment temperature were evaluated, as well as the effect of suppressing P in the bioactivity ability of the materials. The morphology and composition of the BG-NPs were studied using FT...

متن کامل

Characterization of Pure and Antimony Doped SnO2 Thin Films Prepared by the Sol-Gel Technique

Pure and antimony doped SnO2 thin films have been prepared by the sol-gel dip coating technique on glass substrate using starting material SnCl2.2H2O as a host and SbCl3 as a dopant. Our experimental results revealed that, the quality of the coated films on the glass depends on process parameters. The effect of annealing temperature, dipping numbe...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Non-crystalline Solids

سال: 2023

ISSN: ['1873-4812', '0022-3093']

DOI: https://doi.org/10.1016/j.jnoncrysol.2022.122050