Optimal Tuning of Decentralized PI Controller of Nonlinear Multivariable Process Using Archival Based Multiobjective Particle Swarm Optimization

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimal gain tuning of PI speed controller in induction motor drives using particle swarm optimization

This article presents particle swarm optimization (PSO)-based optimal gain tuning of proportional integral (PI) speed controller in an induction motor (IM) drive (30 hp) with mine hoist load diagram. Optimization considers the load and speed variations, and provides appropriate gains to the speed controller to obtain good dynamic performance of the motor. IM performance is checked with the opti...

متن کامل

Reliability based multiobjective optimization design procedure for PI controller tuning . ?

In this work, we propose an hybrid multi-objective optimization design procedure for PI controller tuning. This procedure focuses on reliability-based optimization instances, where Montecarlo methods are used to evaluate quantitatively the performance degradation of a controller, due to unexpected or unmodeled dynamics. The procedure is evaluated on a non-linear Peltier process. The presented r...

متن کامل

Optimization of PI Coefficients in DSTATCOM Nonlinear Controller for Regulating DC Voltage using Particle Swarm Optimization

Non-linear controller is preferred to linear controller due to non-linear operation of DSTATCOM. System dynamic can be improved by regulating and fixing the capacitor DC voltage in DSTATCOM. The nonlinear control is based on exact linearization via feedback. There is a PI controller in this system to regulate DC voltage. In conventional scheme, the trial and error method is used to determine PI...

متن کامل

Search Optimization using Multiobjective Particle Swarm Optimization

The reusability provides many benefits such as increasing productivity, Reliability & Quality along with reducing the cost &development time and if the number of components developed is not according to the requirement then the technique of reusability is of great help. The main problem faced by the CBSE in reusability is to select the component for reuse as before reusing there is need to retr...

متن کامل

Multiobjective Optimal Power Flow Using Particle Swarm Optimization

Power system must be operated in such a way that both real and reactive powers are optimized simultaneously. Reactive powers should be optimized to provide better voltage profile as well as to reduce system losses. The four objectives of minimization of fuel cost, minimization of emission, minimization of losses and increasing stability by minimizing system stability index, these are conflictin...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Modelling and Simulation in Engineering

سال: 2014

ISSN: 1687-5591,1687-5605

DOI: 10.1155/2014/504706