Optimization of Content of Yb2O3 Sintering Aid in Millimeter-Wave Sintering of AlN

Microwave Sintering of High Thermal Conductivity Aln

In this study, a combustion synthesized AlN powder was sintered using microwave as heating source. The microwave was 2.45 GHz and the sintering process was carried out in a single-mode cavity. The sintering temperature was between 1800°C and 2000°C with a power ranging from 400 to 700W. The as-synthesized AlN was ground to under 2μm and yttria was used as sintering aid. The effects of the amoun...

the washback effect of discretepoint vs. integrative tests on the retention of content in knowledge tests

در این پایان نامه تاثیر دو نوع تست جزیی نگر و کلی نگر بر به یادسپاری محتوا ارزیابی شده که نتایج نشان دهندهکارایی تستهای کلی نگر بیشتر از سایر آزمونها است

A Study of Millimeter-Wave Sintering of Fine-Grained Alumina Compacts

Improvement of ionic conductivity of gadolinium doped ceria electrolyte with nano CuO sintering aid

Gadanium doped cerium oxide ceramic (GDC) is widely used as solid electrolytes in solid oxide fuel cells because of its high oxygen ion conductivity. In this study, the effect of addition of nano CuO as a sintering aid on the properties of GDC electrolyte were investigated. For this purpose, 0.2, 0.5, and 1% mole of nano Cuo was added to GDC ceramics, which was synthesized by the solid-state me...

PRESSURELESS SINTERING OF B4C-NANOTiB2 NANOCOMPOSITE BY ADDITION OF Fe AND Ni AS SINTERING AIDS

B4C and its composites with TiB2 as second phase continues to be extensively used as the preferred ceramic material in military applications as armor systems for absorbing and dissipating kinetic energy from high velocity projectiles. It also exhibits a high melting point (2427 °C), and high neutron absorption cross section. Pressureless sintering of the B 4C-nanoTiB2 nanocomposite using small ...