Optimization of energy in Distillation column by Temperature and Pressure
نویسندگان
چکیده
منابع مشابه
Optimization of Distillation Column Operation by Simulated Annealing
Abstract: In this paper, an exergy analysis approach is proposed for optimal design of distillation column by using simulated annealing algorithm. First, the simulation of a distillation column was performed by using the shortcut results and irreversibility in each tray was obtained. The area beneath the exergy loss profile was used as Irreversibility Index in the whole column. Then, First Opti...
متن کاملeconomic optimization and energy consumption in tray dryers
دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...
15 صفحه اولOptimization of Energy Consumption in Sequential Distillation Column
Distillation column is one of the most common operations in process industries and is while the most expensive unit of the amount of energy consumption. Many ideas have been presented in the related literature for optimizing energy consumption in distillation columns. This paper studies the different heat integration methods in a distillation column which separate Benzene, Toluene, Xylene, and ...
متن کاملEnergy and Economic Optimization of Distillation Sequencing
Effective parameters that can effect on the performance of the separation system consist of operating pressure, operating temperature, reflux ratio, and kind of produce desirable products and different sequences of splits. As take a separation system with optimal performance is dependent on optimization of above mentioned effective parameters. In generally, there are two criteria (as object fun...
متن کاملHigh Purity Distillation Column: Simulation and Optimization
Distillation columns with a high-purity product (down to 7 ppm) have been studied. A steady state model is developed using a commercial process simulator. The model is validated against industrial data. Based on the model, three major optimal operational changes are identified. These are, lowering the location of the feed & side draw streams, increasing the pressure at the top of the distillati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Electronics and Communication Engineering
سال: 2015
ISSN: 2348-8549
DOI: 10.14445/23488549/ijece-v2i8p104