Optimization of green sand mould system using Taguchi based grey relational analysis
نویسندگان
چکیده
منابع مشابه
Optimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
متن کاملMulti-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis
In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi's design of experiments. The Taguchi technique was coupled with a grey relational analysis to obta...
متن کاملMulti-objective optimization in Turning of EN31 steel using Taguchi based grey relational analysis
Machining can be outlined as the process of taking away material from a work piece in the grade of chips. During a machining process, isolated of the energy is turned into heat energy through the detritions yielded between the tool and the work piece and the plastic deformation of the work material in the machining zone. Turning is charmed by several constituents, for example, the cutting speed...
متن کاملMulti-objective optimization in WEDM of D3 tool steel using integrated approach of Taguchi method & Grey relational analysis
In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...
متن کاملOptimization of 6061T6 CNC Boring Process Using the Taguchi Method and Grey Relational Analysis
This study investigated the optimization of computer numerical control (CNC) boring operation parameters for aluminum alloy 6061T6 using the grey relational analysis (GRA) method. Nine experimental runs based on an orthogonal array of Taguchi method were performed. The surface properties of roughness average and roughness maximum as well as the roundness were selected as the quality targets. An...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: China Foundry
سال: 2018
ISSN: 1672-6421,2365-9459
DOI: 10.1007/s41230-018-7188-1