Optimization of Machine Process Parameters in EDM for EN 31 Using Evolutionary Optimization Techniques
نویسندگان
چکیده
منابع مشابه
Optimization of EDM Process Parameters: A Review
Electrical Discharge Machining performance is generally evaluated on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), Relative Wear Ratio (RWR) and Surface Roughness (SR). The important EDM machining parameters affecting to the performance measures of the process are discharge current, pulse on time, pulse off time, arc gap, and duty cycle [9]. A considerable amount of work has b...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملUsing design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters
The main objectives of this research are, therefore, to assess the effects of process parameters and to determine their optimal levels machining of Inconel 718 super alloy. gap voltage, current, time of machining and duty factor are tuning parameters considered to be study as process input parameters. Furthermore, two important process output characteristic, have been evaluated in this research...
متن کاملOptimization of Machining Parameters in EDM process by using Robust Design
In this study, an experiment is conducted to optimize the machining parameters of the Electric Discharge Machining on EN 31 tool steel with copper as an electrode considering the performance characteristics using the Taguchi method. Performance characteristics Material Removal Rate has been chosen to evaluate the machining effects. Parameters selected in this study are Pulse on time, Pulse off ...
متن کاملMulti-objective Optimization of Edm Parameters Using Grey Relation Analysis
This paper involves the multi-objective optimization of process parameters of AlSi10Mg/9 wt% alumina/3 wt% graphite in Electrical Discharge Machining for obtaining minimum surface roughness, minimum tool wear rate and maximum material removal rate. The important machining parameters were selected as peak current, flushing pressure and pulse-on time. Experiments were conducted by selecting diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Technologies
سال: 2018
ISSN: 2227-7080
DOI: 10.3390/technologies6020054