Optimization of Machining Parameters Using Fuzzy Taguchi Method for Reducing Tool Wear
نویسندگان
چکیده
منابع مشابه
Optimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method
In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...
متن کاملOptimization of cryogenic treatment parameters to maximise the tool wear of HSS tools by Taguchi method
This work describes the optimization of cryogenic treatment (CT) parameters such as the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time to maximise the tool wear of high speed steel tools in dry turning of AISI 316 grade austenitic stainless steels by Taguchi method. For this purpose, four iteration of Taguchi design (L16) have been used...
متن کاملOptimization of Machining Parameters in ECM of Al/B4C Composites Using Taguchi Method
Aluminium metal matrix composites (AMMCs) are now gaining their usage in aerospace and automotive industries because of their inherent properties like high strength to weight ratio, low wear rate etc. Electrochemical Machining (ECM) allowed success in the production of newer materials, especially for the aerospace and biomedical applications. In this paper an attempt is made to machine the LM6 ...
متن کاملOptimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguc...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2018
ISSN: 2076-3417
DOI: 10.3390/app8071011