Optimization of medium–low-grade phosphorus rock carbothermal reduction process by response surface methodology
نویسندگان
چکیده
منابع مشابه
Optimization and Modeling of CuOx/OMWNT’s for Catalytic Reduction of Nitrogen Oxides by Response Surface Methodology
A series of copper oxide (CuOx) catalysts supported by oxidized multi-walled carbon nanotubes (OMWNT’s) were prepared by the wet impregnation method for the low temperature (200 °C) selective catalytic reduction of nitrogen oxides (NOx) using NH3 as a reductant agent in the presence of excess oxygen. These catalysts were characterized by FTIR, XRD, SEM-EDS, and H2-TPR meth...
متن کاملoptimization of nitrate reduction by electrocoagulation using response surface methodology
conclusions the results of this study show that it is possible to remove nitrate, and its intermediates from waste water. regarding the desirability of the process, the field scale study is proposed. results the results showed that by applying electric current of 0.14 a for 120 minutes, the nitrate content would reduce down to 97%. the obtained r2 for the nitrate removal model was higher than 0...
متن کاملOptimization of US-Electropersulfate Process for Leachate Treatment by Response Surface Methodology
Introduction: Chemical Oxidation Demand (COD) is an important parameter in treatment of leachate. Leachate from solid waste has a high pollutants that must be treatment before discharge to environment. The aim of this study was optimization of US-Electro/persulfate process, predicate of optimum conditions by RSM for landfill leachate treatment. Methods and materials: In this experimental st...
متن کاملRecycling process of spent bleaching clay: Optimization by response surface methodology
Oil refining is an inevitable step in production of edible and industrial oil. Bleaching is the most important process among the refining processes. Bleaching adsorption is the most common method and clay is the most widely used adsorbent in this method. Disposal of bleaching clay, as a waste from re-refining plants, makes many environmental problems and economic losses. In the current study, t...
متن کاملPreparation of U3O8 by Calcination from Ammonium Uranyl Carbonate Using Response Surface Methodology: Process Optimization
The parameters to prepare U3O8 by calcination from ammonium uranyl carbonate were optimized by using response surface methodology. A quadratic equation model for the value of total uranium and U4+ of triuranium octaoxide was built and the effects of main factors and their corresponding relationships were obtained. The statistical analysis of the results indi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Green Processing and Synthesis
سال: 2020
ISSN: 2191-9550,2191-9542
DOI: 10.1515/gps-2020-0035