Optimization of Microextrusion Preforming Using Taguchi Method
نویسندگان
چکیده
منابع مشابه
Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method
In this paper, the authors present an experimental study of roughness characteristics of electroless Ni-B coatings and optimization of the coating process parameters based on L27 Taguchi orthogonal design. Three coating process parameters are considered viz. bath temperature, reducing agent concentration, and nickel source concentration. It is observed that concentration of reducing agent toget...
متن کاملPerformance optimization of a rotary mower using Taguchi method
Optimum energy consumption and prevention of energy losses are important issues in various fields including agricultural engineering. Mower is one of the agricultural machineries that can waste too much energy if does not function properly. In this study, the performance of a single disc rotary mower was studied and optimized by measurement of cutting quality of the stem cross section (cutting ...
متن کاملOptimization of Edm Process Parameters Using Taguchi Method: a Review
Electrical discharge machining is assessed on the basis of Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface Roughness (SR). Process parameters that mostly affected the EDM Process are Pulse on Time, Pulse off Time, Discharge Current, Arc Gap and Duty Cycle. This paper reviews research for the optimization and improvement of various performance parameters measured in the experiment...
متن کاملParametric Optimization on single objective Dry Turning using Taguchi Method
ABSTRACT The objective of this investigation is to obtain an optimal setting of process parameters in turning for maximizing the material removal rate of the manufactured component. The material removal rate has been investigated in this analysis while machining practically used components. As per Taguchi’s “Design of Experiments”, the number of experiments to be conducted in this analysis is c...
متن کاملModification of Glucose biosensor using Pt/MWCNTs electrode and optimization by application of taguchi method
In this paper, multi-wall carbon nanotubes (MWCNTs), gold nanoparticles (GNp) and glucose oxidase (GOD) was developed for the specific detection of glucose. MWCNTs were chemically modified with the H2SO4–HNO3 pretreatment to introduce carboxyl groups which were used to interact with the amino groups of poly(allylamine) (PAA) and cysteamine via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Problems in Engineering
سال: 2013
ISSN: 1024-123X,1563-5147
DOI: 10.1155/2013/305797