Optimization of Polyethylene Grade Transitions in Fluidized Bed Reactors with Constraints on the Polymer Sticking Temperature

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor

24 Fixed Film Stationary Bed and Fluidized Bed Reactors

GASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS

This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...

Modeling of Non-isothermal Reacting Flow in Fluidized Bed Reactors

Abstract: We investigate a prototype concept of a back-up electricity device where we use liquid formic acid (FA) to produce a mixture of carbon dioxide (CO2) and hydrogen (H2) which is used in a PEM fuel cell, Fig. 1. In the fluidized bed reactor the liquid FA is decomposed to a gaseous mixture of CO2 and H2 in the presence of microscopic floating solid catalytic particles. We describe the sys...