Optimization of Polyethylene Grade Transitions in Fluidized Bed Reactors with Constraints on the Polymer Sticking Temperature
نویسندگان
چکیده
In gas-phase polyolefin processes, it is important to evaluate the melting temperature of particles since exceeding this may cause particle sticking and aggregation. work, a mod...
منابع مشابه
Control of a Fluidized Bed Polyethylene Reactor
In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...
متن کاملGASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS
This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...
متن کاملModeling of Non-isothermal Reacting Flow in Fluidized Bed Reactors
Abstract: We investigate a prototype concept of a back-up electricity device where we use liquid formic acid (FA) to produce a mixture of carbon dioxide (CO2) and hydrogen (H2) which is used in a PEM fuel cell, Fig. 1. In the fluidized bed reactor the liquid FA is decomposed to a gaseous mixture of CO2 and H2 in the presence of microscopic floating solid catalytic particles. We describe the sys...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Industrial & Engineering Chemistry Research
سال: 2021
ISSN: ['0888-5885', '1520-5045']
DOI: https://doi.org/10.1021/acs.iecr.0c05466