Optimization of Surface Roughness of AISI P20 on Electrical Discharge Machining Sinking Process using Taguchi Method
نویسندگان
چکیده
منابع مشابه
Optimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method
In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...
متن کاملOptimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method
Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguc...
متن کاملParametric Optimization for Surface Roughness in Wire Electrical Discharge Machining— A Taguchi Approach
High carbon high chromium alloy tool steels (D-3) with excellent abrasion resistance (HRC: 58-65) are increasingly used in manufacturing high performance cutting tools (dies and punches), blanking and punching tools, extrusion tools, etc. Being a hard material, it is difficult to machine using conventional machining methods. Wire Electric Discharge Machine(WEDM) seems to be a viable option to m...
متن کاملTaguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining
In modern machining process, optimization technique is used to find the optimal values of input parameters and the effect of those parameters on response variables. If response parameters are more than one, Taguchi method of optimization may give different set of optimal levels for each response. In the present study, Taguchi-grey relational approach based multi response optimization has been u...
متن کاملPerformance Evaluation of Powder Metallurgy Electrode in Electrical Discharge Machining of AISI D2 Steel Using Taguchi Method
In this paper an attempt has been made to correlate the usefulness of electrodes made through powder metallurgy (PM) in comparison with conventional copper electrode during electric discharge machining. Experimental results are presented on electric discharge machining of AISI D2 steel in kerosene with copper tungsten (30% Cu and 70% W) tool electrode made through powder metallurgy (PM) techniq...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JTAM (Jurnal Teori dan Aplikasi Matematika)
سال: 2021
ISSN: 2614-1175,2597-7512
DOI: 10.31764/jtam.v5i1.3291