Optimization of Turning Process Parameters in Machining Heat Treated Steel
نویسندگان
چکیده
منابع مشابه
simultaneous optimization of machining parameters and tool geometry specifications in turning operation of aisi1045 steel
machining operation is one of the most applicable processes for the manufacturing of industrial parts. usually, the quality of finished part in turning operation is measured in terms of surface roughness. in turn, surface quality is determined by machining parameters and tool geometry specifications. the main objective of this study is to model and optimize machining parameters and tool geometr...
متن کاملOptimization of Machining Parameters in Turning Processes by Dynamic Programming
This paper presents a method for optimizing the machining parameters in rough turning processes to control the vibrations and deformations and minimize the production time per component under practical constraints. The optimization model is formulated, in which piecewise constraints are introduced based on the varying length-to-diameter (L/D ) ratio of the workpiece. The optimization problem is...
متن کاملOptimization of Cutting Parameters in Turning Process
Predicting the main cutting force during turning is of great importance as it helps in setting the appropriate cutting parameters before machining starts.Again, optimization of cutting parameters is one of the most important elements in any process planning of metal parts as economy of machining operation plays a key role in gaining competitive advantage. This paper presents an experimental stu...
متن کاملIntegration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
متن کاملOptimization of Process Parameters in Turning of AISI 8620 Steel Using Taguchi and Grey Taguchi Analysis
The aim of this research is to investigate the optimization of cutting parameters (cutting speed, feed rate and depth of cut) for surface roughness and metal removal rate in turning of AISI 8620 steel using coated carbide insert. Experiments have been carried out based on Taguchi L9 standard orthogonal array design with three process parameters namely cutting speed, feed rate and depth of cut f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.31339