Optimization of Welding Parameters and Microstructure and Fracture Mode Characterization of GMA Welding by Using Taguchi Method on SS304H Austenitic Steel
نویسندگان
چکیده
منابع مشابه
Parametric Optimization of TIG Welding on Stainless Steel (202) & Mild Steel by using Taguchi Method
The main objective of industries reveal with manufacturing better quality product at low cost and increase productivity. TIG welding is most vital and common operation use for joining of two similar or dissimilar parts with heating the material or applying the pressure by using the filler material for increasing productivity with less time and cost constrain. The TIG welding parameters are the ...
متن کاملOptimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملoptimization of the parameters of low-carbon steel (en10130) welding using friction stir welding method
friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. this heat causes a paste area. shoulder pressure and pin spin cause edges integration and lead to welding. in this study, firstly, the feasibility of welding of steel sheet (en10130) with a thickness of 1.5mm has been tested by 58 experimen...
متن کاملDesign optimization of cutting parameters for turning of AISI 304 austenitic stainless steel using Taguchi method
In the present work Taguchi method is used to optimize cutting parameters during dry turning of AISI 304 austenitic stainless steel with AlTiCrN coated tool. The coating was deposited on fine-grained K-grade (ISO K-20) cemented carbide cutting insert using physical vapor deposition (PVD) technique. The turning parameters evaluated are cutting speed of 200 and 260 m/min, feed rate of 0.20 and 0....
متن کاملOptimization of Process Parameters of Friction Stirs Welding of Aluminum Alloys (6061) Using Taguchi Method
Friction Stir Welding (FSW) is considered to be the most significant development in metal joining technologies to join high strength aerospace aluminum alloys. In order to improve the reliability and quality of the products manufactured by FSW process input process parameters such as tool rotational speed, welding speed and axial force are to be optimized. This study deals with the optimization...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics and Mechanical Engineering
سال: 2018
ISSN: 2354-0192
DOI: 10.2478/mme-2018-0088