Optimization on Reducing Slag Entrapment in 150 × 1270 mm Slab Continuous Casting Mold
نویسندگان
چکیده
منابع مشابه
Adaptive Mold Level Control in a Continuous Steel Slab Casting Process
Surface quality of the steel slabs in a Continuous Casting (C.C.) process is mainly determined by the stability of the Mold Level Control (MLC). Excessive mold level fluctuations lead to an additional machine scarfing process which is applied to the slabs to avoid surface defects. A conventional Proportional-Integral-Derivative (PID) controller is not robust enough to deal with the disturbances...
متن کاملTransient Fluid-Flow Phenomena in the Continuous Steel-Slab Casting Mold and Defect Formation
Phenomena associated with the turbulent flow of molten steel in a continuous casting mold are responsible for many defects in the final product, including surface slivers, frozen meniscus hooks, captured inclusions that enter the mold from upstream, and mold slag entrapment. Animations of some of these transient flow phenomena are presented from Large-Eddy Simulations of a typical slab caster w...
متن کاملPhysical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملModeling of Steel Grade Transition in Continuous Slab Casting Processes
Mathematical models have been developed and applied to investigate the composition distributions that arise during steel grade changes in the continuous slab casting processes. Three-dimensional turbulent flow and transient mixing phenomena in the mold and the strand were calculated under conditions corresponding to a sudden change in grade. The composition distribution in the final slab was th...
متن کاملTurbulent Flow and Particle Motion in Continuous Slab-Casting Molds
Turbulent flow in the continuous casting process involves transient phenomena and the transport of inclusion particles and plays an important role in the quality of the steel. As shown in Fig. 1, the molten steel jet entering the mold may carry inclusion particles (e.g. alumina) and argon bubbles. Liquid flux can also be entrained from the shear of the liquid flow across the top surface and for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12111774