Optimization Process Parameters of Equal Angular Channel Pressing According to the Measurement Results of Microstructural Homogeneity
نویسندگان
چکیده
منابع مشابه
Size effect in equal channel angular pressing (ECAP) process
The influence of the sample size (diameter while keeping the length constant) in equal channel angular pressing (ECAP) of pure aluminum is examined using finite element method (FEM) and experiment. Different sized aluminum rods were processed via ECAP and the effect of sample size on the strain homogeneity, process load, and the ratio of the friction to the total force were evaluated. The resul...
متن کاملRe-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملA new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process
Tubular channel angular pressing (TCAP) is a recently invented novel severe plastic deformation technique for producing UFG tubes. Plastic deformation analysis using the finite element method (FEM) was carried out to investigate the effects of trapezoidal channel geometry on strain inhomogeneity index (SII), strain level and required load compared to previously used channel geometries. The resu...
متن کاملParameter Analysis and optimization of equal channel angular pressing extrusion for titanium alloy using Taguchi design of experiments method
In this paper the influence of different parameters on equal channel angular pressing (EADAP) of titanium alloy is investigated. In the first step the most important parameters are selected, and then a table of experiments is designed using Taguchi method. After designing the table of experiments, all of the experiments are simulated using Abacus software and the results are optimized using Tag...
متن کاملMICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS OF AlSiMnFe ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
V.A. Andreyachshenko, Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda, Kazakhstan A.B. Naizabekov, Mining and Metallurgy Faculty, Rudny Industrial Institute, Rudny, Kazakhstan In the present research, equal channel angular pressing (ECAP) was conducted. The defectness degree of the alloy for one pass and maximum strain was determined. Ultra fine grained...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2018
ISSN: 1980-5373,1516-1439
DOI: 10.1590/1980-5373-mr-2018-0270