Optimizing Roller Design to Improve Web Strain Uniformity in Roll-to-Roll Process
نویسندگان
چکیده
منابع مشابه
Design Parameter Analysis of a Roll-to-Roll Printing Machine
The stability of multi-input and multi-output web-tension systems is an important factor that is required for the roll-to-roll printing machines. This paper analyzes stability for design parameters of a web-tension system of a high-speed gravure printing machine. Analyzed parameters include moment of inertia of the passive dancer, viscous friction coefficient of the dancer system, distances fro...
متن کاملAnode Layer Linear Ion Source for Roll-to-Roll Process from 300 mm to 1550 mm
Roll-to-roll (RTR) process requires a linear surface treatment source in various processes such as pre-treatment, etching, and deposition. For high speed and large width processes the linear source should have superior characteristics that can be applied to 100~300 m/mim process and large width treatment up to 2 m. Several linear surface treatment sources have been proposed to the RTR process. ...
متن کاملEffects of Preheat Supply on Embossed Pattern Depth in Roll-to-Roll Process
In this study, we examined the sensitivity of embossed pattern depth to preheat supply and cooling, and also tested how pattern type and density affect the embossed depth. The main factors such as roller temperature, roller speed, and applied force that mostly affect embossed pattern qualities of roll-to-roll hot embossing were determined based on the response surface methodology. Eight conditi...
متن کاملThermoresistive Strain Sensor and Positioning Method for Roll-to-Roll Processes
This study uses the Joule heating effect-generated temperature difference to monitor in real-time and localize both compressive and tensile strains for the polymer substrates used in the roll-to-roll process. A serpentine gold (Au) line was patterned on a polyethylenenaphthalate (PEN) substrate to form the strain sensor based on thermoresistive behavior. This strain sensor was then subjected to...
متن کاملA roll-to-roll welding process for planarized silver nanowire electrodes.
We demonstrate continuous roll-to-roll production of highly conductive silver network films on a plastic substrate via mechanical and chemical welding processes. This process included three essential steps: (i) solvent spraying, (ii) roll compression, and (iii) salt treatment and washing. The sheet resistance of the resulting AgNW film was 5 Ω sq(-1) at 92% transmittance, which was the lowest s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Sciences
سال: 2020
ISSN: 2076-3417
DOI: 10.3390/app10217564