Optimizing the Dose for Energy Dispersive Electron Probe X-ray Microanalysis Measurements

Quantitative Energy-dispersive Electron Probe X-ray Microanalysis of Individual Particles

An electron probe X-ray microanalysis (EPMA) technique using an energy-dispersive X-ray detector with an ultra-thin window, designated low-Z particle EPMA, has been developed. The low-Z particle EPMA allows the quantitative determination of concentrations of low-Z elements such as C, N, and O, as well as higher-Z elements that can be analyzed by conventional energydispersive EPMA. The quantitat...

Characterization of atmospheric particles by electron probe X-ray microanalysis.

Microchemical glass standards were used to validate a quantitation method based on peak-to-background (P/B) ratios from electron probe x-ray microanalysis spectra. This standardless method was applied to the determination of concentrations of individual particles from Malpha or Lalpha lines, as well as from Kalpha lines. The algorithm was tested on particulate glass samples for diameters rangin...

scanning electron microscopy and energy-dispersive x-ray microanalysis of set cem cement after application of different bleaching agents

introduction: the present study evaluated the element distribution in completely set calcium-enriched mixture (cem) cement after application of 35% carbamide peroxide, 40% hydrogen peroxide and sodium perborate as commercial bleaching agents using an energy-dispersive x-ray microanalysis (edx) system. the surface structure was also observed using the scanning electron microscope (sem). methods ...

X-ray microanalysis attachment for electron microscope.

Barriers to Quantitative Electron Probe X-Ray Microanalysis for Low Voltage Scanning Electron Microscopy

Low voltage x-ray microanalysis, defined as being performed with an incident beam energy ≤5 keV, can achieve spatial resolution, laterally and in depth, of 100 nm or less, depending on the exact selection of beam energy and the composition of the target. The shallow depth of beam penetration, with the consequent short path length for x-ray absorption, and the low overvoltage, the ratio of beam ...