Optimizing the Properties of Polyether Based Polyurethane Foam
نویسندگان
چکیده
منابع مشابه
Nonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملAnisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولSoy-based Polyurethane Foam Reinforced with Carbon Nanotubes
The objective of this research is to develop soy-based polyurethane (PU) foam product reinforced with carbon nanotubes. The shortage of petroleum and the increasing concern on environmental issues have resulted in an interest in using renewable substances as building blocks for polymer applications. Multi-walled carbon nanotube (MWNT) was used in this study to reinforce the soy-based polyuretha...
متن کاملEffect of the Addition of Wood Flours on the Properties of Rigid Polyurethane Foam
The objective of this study is to investigate an appropriate process to fabricate the wood-polyurethane hybrid composites [wood-polyurethane foam (PUF)]. Rigid PUFs that contain up to 20% wood flours were successfully fabricated from polymeric 4,4-diphenylmethane diisocyanate, polyols, silicone surfactant, dibutin dilaurate/ dimethylethanolamine catalysts, and distilled water (chemical blowing ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Journal of Polymer Chemistry
سال: 2013
ISSN: 2165-6681,2165-6711
DOI: 10.4236/ojpchem.2013.34015