Optimum Test for Estimating The Low-Voltage Impulse Breakdown Voltage by The Step-up Method
نویسندگان
چکیده
منابع مشابه
Estimation for the Weibull Power Law Parameters in the Step-up Voltage Test
In assessing the insulation withstand level of the electric apparatus, the step-up test method is used. However, we have still many unknown matters regarding the treatment of the results. In this paper, we assume that the underlying probability distribution of failure time with a constant voltage level follows a Weibull distribution and that an inverse power law relationship between the mean li...
متن کاملA Voltage Gain Enhanced Ky Step Up
In this paper, KY converter and voltage gain enhanced KY converter are included. A KY converter is a voltage step up converter, it can be considered as a buck converter along with synchronous rectification. In general, a KY converter consists of two MOSFET switches. To obtain higher voltage gain we can adopt different methods. Some of these techniques, advantages and disadvantages of each metho...
متن کاملBreakdown Voltage of High-voltage GaN FETs
GaN FETs offer superior advantages in high-voltage and high-temperature operation due to its large bandgap (3.4 eV) and high breakdown field strength (3.3 MV/cm). This combination of the large bandgap and high breakdown field makes these devices very attractive for power switching applications. In this regard, a key figure of merit is the breakdown voltage of the transistor, which must be high ...
متن کاملInfluence of the Parameters of Disk Winding on the Impulse Voltage Distribution in Power Transformers
Overvoltage distribution along the transformer winding must be uniform to certify the safety of the operation of the power transformer. Influence of the parameters variation on the impulse voltage distribution (IVD) in disk winding transformer is going to be analyzed which hasn’t been analyzed on this type of winding in the previous papers. In this research, a transformer with disk winding and ...
متن کاملInvestigation of Voltage Breakdown Caused by Microparticles
Degradation of RF accelerating cavities caused by field emission currently limits the design of future linear accelerators. When field emission is the problem, foreign particles often deserve the blame, but they can be ”processed” away if the cavity electric field is high enough to initiate voltage breakdown near the particle site, in which case the troublesome particle vaporizes, leaving behin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 1988
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1972.108.222