Organosulfide-plasticized solid-electrolyte interphase layer enables stable lithium metal anodes for long-cycle lithium-sulfur batteries
نویسندگان
چکیده
منابع مشابه
Electrolyte and Solid-Electrolyte Interphase Layer in Lithium-Ion Batteries
The supply and the management of the energy are particularly at the centre of our daily concerns and represent a socio-economic priority. Indeed, while cars use fossil fuel as the main source of energy for over a century, the depletion of the oil reserves and the necessity to reduce the carbon dioxide emissions, stimulate the development of electric vehicles. Therefore, one of the main challeng...
متن کاملFerrocene-Promoted Long-Cycle Lithium-Sulfur Batteries.
Confining lithium polysulfide intermediates is one of the most effective ways to alleviate the capacity fade of sulfur-cathode materials in lithium-sulfur (Li-S) batteries. To develop long-cycle Li-S batteries, there is an urgent need for material structures with effective polysulfide binding capability and well-defined surface sites; thereby improving cycling stability and allowing study of mo...
متن کاملSolid Electrolyte Interphase Formation on Silicon and Lithium Titanate Anode Materials in Lithium-Ion Batteries
Aiming at an improved knowledge of the formation of the solid electrolyte interphase (SEI), as basis for the safe and efficient use of new anode materials, we investigated the SEI formation on silicon and lithium titanate (LTO) anodes by electrochemical impedance spectroscopy (EIS) and ex situ X-ray photoelectron spectroscopy (XPS) measurements. While the EIS measurements performed at equidista...
متن کاملTransforming from planar to three-dimensional lithium with flowable interphase for solid lithium metal batteries
Solid-state lithium (Li) metal batteries are prominent among next-generation energy storage technologies due to their significantly high energy density and reduced safety risks. Previously, solid electrolytes have been intensively studied and several materials with high ionic conductivity have been identified. However, there are still at least three obstacles before making the Li metal foil-bas...
متن کاملA gel-ceramic multi-layer electrolyte for long-life lithium sulfur batteries.
A newly designed gel-ceramic multi-layer electrolyte has been used as the separator and electrolyte for lithium sulfur (Li-S) batteries. The Li-S cells, free of the shuttle effect, exhibit superior electrochemical performance. With almost no self-discharge, the cell demonstrates an initial discharge specific capacity of up to 725 mA h g(-1) and remains at 700 mA h g(-1) after 300 cycles at the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2017
ISSN: 2041-1723
DOI: 10.1038/s41467-017-00974-x