منابع مشابه
Sensitive Measurement of Flow Velocity and Flow Direction Using a Circular Thermistor Array
Eight highly sensitive amorphous germanium thermistors (TCR = -1.8%/K) are the sensitive part of the micromachined sensors for flow velocity and flow direction. Carried by a 1.3 μm thick diaphragm they measure temperature differences generated by the sample flow and a heater (430 μW). This allows gas flow measurements in the range from 0.025 m/s to about 3 m/s with a sensitivity of up to 30 mV/...
متن کاملTwo-fluid Electrokinetic Flow in a Circular Microchannel (RESEARCH NOTE)
The two-fluid flow is produced by the combined effects of electroosmotic force in a conducting liquid and pressure gradient force in a non-conducting liquid. The Poisson-Boltzmann and Navier-Stokes equations are solved analytically; and the effects of governing parameters are examined. Poiseuille number increases with increasing the parameters involved. In the absence of pressure gradient, the ...
متن کاملExperimental Investigation of Bed Variations due to Circular Culvert Jet with Different Angles
Downfall flows from different outlet hydraulic structures such as culverts and jetsthrowingtothe erodible downstream bed cause scour hole and changes in the downstream bed topography. Therefore,by performing some physical modeling tests on culvert jet flow under different angles, changes in the downstream bed topography under the effect of different parameters such as flow rate, depth of the ta...
متن کاملFlow Visualization Around a Non - Circular Tube
The flow behavior around a cam shaped tube in cross flow has been investigated experimentally using flow visualization and pressure distribution measurement. The range of attack angle and Reynolds number based on an equivalent circular diameter are within 0 ≤ α ≤ 360˚ and 2 x 104 < Reeq < 3.4 x 104, respectively. The pressure drag features are clarified in relation to the flow behavior around t...
متن کاملTransition in circular Couette flow
Two distinct kinds of transition have been identified in Couette flow between concentric rotating cylinders. The first, which will be called transition by spectral evolution, is characteristic of the motion when the inner cylinder has a larger angular velocity than the outer one. As the speed increases, a succession of secondary modes is excited; the first is the Taylor motion (periodic in the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Hydro-Engineering and Environmental Mechanics
سال: 2014
ISSN: 2300-8687
DOI: 10.1515/heem-2015-0013