Oxidation Behavior of Ta–Al Multilayer Coatings
نویسندگان
چکیده
منابع مشابه
Oxidation behavior of AlN/CrN multilayered hard coatings
We report on the oxidation behavior of AlN/CrN multilayers at 900 °C, deposited by radio frequency magnetron sputtering. It is shown that oxidation in this system is controlled by diffusion of Cr towards the surface and formation of Cr2O3. Cr diffusion is found to mainly occur along grain boundaries. Thus, coherent cubic AlN/CrN multilayer regions with coarse columnar grain structures are found...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کاملEllipsometry of light scattering from multilayer coatings.
A scatterometer is extended and allows us to perform ellipsometric measurements on scattered light in each direction of space. Experimental data are given for single thin-film layers and optical coatings and reveal unexpected results. The phenomena are investigated by means of the electromagnetic theories of surface and bulk scattering that emphasize the role of partial correlation and localize...
متن کاملDelamination of multilayer thermal barrier coatings
Multilayer thermal barrier coatings (TBCs) on superalloy substrates are comprised of an intermetallic bond coat, a thermally grown oxide (TGO) layer, and a porous zirconia top coat that provides thermal protection. The TGO attains a thickness of 1±10 lm prior to failure, while the bond coat and zirconia layer are each about 50±100 lm thick. The preferred method for manufacturing TBCs comprises ...
متن کاملLow Friction CrNMPP/TiNDCMS Multilayer Coatings
Transition metal nitrides like CrN and TiN are widely used in automotive applications due to their high hardness and wear resistance. Recently, we showed that a multilayer architecture of CrN and TiN, deposited using the hybrid-high power impulse magnetron sputtering (HIPIMS) and direct current magnetron sputtering (DCMS)-HIPIMS/DCMS deposition technique, results in coatings which indicate not ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coatings
سال: 2019
ISSN: 2079-6412
DOI: 10.3390/coatings9120810