Oxide-supported PtCo alloy catalyst for intermediate temperature polymer electrolyte fuel cells
نویسندگان
چکیده
منابع مشابه
Catalyst supports for polymer electrolyte fuel cells.
A major challenge in obtaining long-term durability in fuel cells is to discover catalyst supports that do not corrode, or corrode much more slowly than the current carbon blacks used in today's polymer electrolyte membrane fuel cells. Such materials must be sufficiently stable at low pH (acidic conditions) and high potential, in contact with the polymer membrane and under exposure to hydrogen ...
متن کاملGraphitic Carbon Nitride Supported Catalysts for Polymer Electrolyte Fuel Cells
Graphitic carbon nitrides are investigated for developing highly durable Pt electrocatalyst supports for polymer electrolyte fuel cells (PEFCs). Three different graphitic carbon nitride materials were synthesized with the aim to address the effect of crystallinity, porosity, and composition on the catalyst support properties: polymeric carbon nitride (gCNM), poly(triazine) imide carbon nitride ...
متن کاملAl2O3 Disk Supported Si3N4 Hydrogen Purification Membrane for Low Temperature Polymer Electrolyte Membrane Fuel Cells
Reformate gas, a commonly employed fuel for polymer electrolyte membrane fuel cells (PEMFCs), contains carbon monoxide, which poisons Pt-containing anodes in such devices. A novel, low-cost mesoporous Si3N4 selective gas separation material was tested as a hydrogen clean-up membrane to remove CO from simulated feed gas to single-cell PEMFC, employing Nafion as the polymer electrolyte membrane. ...
متن کاملSupporting information Free Standing Graphene Oxide Paper: New Polymer Electrolyte for Polymer Electrolyte Fuel Cells
Graphite oxide was synthesized from natural flake graphite by the modified Hummers method. In brief, 200 mg of Graphite particles were immersed in Concentrated sulfuric acid (46 ml) and KMnO4 (6 g) was added slowly in small quantities in which temperature was maintained between the 0 and 5 c using an ice bath, after the complete oxidation of KMnO4, the mixture was heated to 37 c and kept at thi...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Catalysis B: Environmental
سال: 2013
ISSN: 0926-3373
DOI: 10.1016/j.apcatb.2013.05.008