Oxygen Activity in Melts of Fe-C-Cr-Ni Based Alloys
نویسندگان
چکیده
منابع مشابه
OXYGEN AND NITROGEN UPTAKE IN Ni-Cr ALLOYS
Oxygen and nitrogen introduced in three Ni-Cr alloy castings were significantly varied according to both different alloys and different melting methods. The arc melting in Ar blow caused significant increases in the amounts of oxygen and nitrogen uptake, which were influenced by alloy composition. The severe gas absorption by the arc melting in Ar blow resulted in the marked occurrence of poros...
متن کاملMicrostructural Examination of Ni-ion Irradiated Fe-Ni-Cr Alloys Followed to Micro-zone Deformation
Examination of deformation microstructures induced by micro-indentation technique by means of transmission electron microscopy following an MV range metallic ion irradiation was performed in order to study the influence of irradiation-produced microstructural defects on plastic deformation behavior of materials. In this work, specimens of an Fe-Cr-Ni austenitic model ternary alloy before and af...
متن کاملProduction and Characterization of Stainless Steel Based Fe-Cr-Ni-Mn-Si(-CO) Shape Memory Alloys
It is well known that the Fe based alloys can exhibit shape memory effect due to the y to E martensitic transformation. The effect may not be as striking as observed in the NiTi alloy but it might become attractive fkom the practical point of view. In this work, two compositions of Fe-Cr-Ni-Mn-Si(-Co) stainless steel based shape memory alloy, prepared by the VIM technique, will be presented. Th...
متن کاملOxidation – Nitridation of Ni-Cr-Al Alloys
A series of alloys containing 24-36 wt pct Cr and 13.5 – 25.0 wt pct Al was reacted with air at 1100 °C for 260 h. The products of isothermal reaction were scales of α-Al 2 O 3 plus small amounts of Cr 2 O 3 . These grew according to parabolic kinetics, interrupted by episodic weight losses caused by partial spallation. No nitridation occurred during the isothermal exposures. Reaction during th...
متن کاملTernary Ni-Fe-Co Alloys Nanowire Electrodeposition
Nanowire is a cylindrical nano-structure with nanometer dimensions. In this research, the studied nanowire was made from the magnetic triple Ni-Fe-Co alloy.
 We utilized ordered porous anodic aluminum oxide as a template for the nanowire deposition. The nanowire arrays were electrodeposited in the cylindrical pores of the oxide layer by AC potential in a simple sulfate bath. Then the relatio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Archives of Foundry Engineering
سال: 2016
ISSN: 2299-2944
DOI: 10.1515/afe-2016-0106