Palladium – Doped ZnO Thin Film Hydrogen Gas Sensor
نویسندگان
چکیده
منابع مشابه
Al-Doped ZnO Thin Film Transistors by Thermal Evaporation
In this paper, Al-doped ZnO thin film transistors (AZO-TFT) were fabricated by the thermal evaporation growth of AZO channel layer on a silicon substrate at temperatures below 250°C. A SiO2 dielectric layer grown by the horizontal furnace was used as a gate. An active layer thickness of 10nm was measured by Atomic Force Microscopy (AFM), and its surface had root mean square (rms) roughness 12.6...
متن کاملNovel hydrogen gas sensor based on single ZnO nanorod
0167-9317/$ see front matter 2008 Elsevier B.V. A doi:10.1016/j.mee.2008.06.021 * Corresponding author. Address: Department of P Florida, 4000 Central Florida Boulevard, Orlando, FL 3 823 2333; fax: +1 407 823 5112. E-mail address: [email protected] (O. Lupan). For extensive use in an industrialized process of individual ZnO nano/microrods as building nanoblock in novel hydrogen sensors, a ...
متن کاملTiO2 thin film gas sensor for monitoring ammonia
Systematic development and mechanistic studies of sensing materials are critical to the design of higher performance gas sensing elements and arrays. Polycrystalline metal-oxide semiconductors such as SnO2 and TiO2 are among the most widely used materials for thin film-based conductometric gas sensors. The mechanistic steps responsible for the gas-induced conductance changes of polycrystalline ...
متن کاملMicromachined thin-film gas flow sensor for microchemical reactors
As microchemical systems (MCS) have gained in importance since their introduction in the last decade, it has become recognized that appropriate sensing and control capabilities are needed if MCS are to reach their potential. In this context, we present a study of the working behavior of a novel thin-film micro flow sensor which is integrated with a silicon microreactor with a submillimeter chan...
متن کاملSnO2/Pt Thin Film Laser Ablated Gas Sensor Array
A gas sensor array was developed in a 10 × 10 mm(2) space using Screen Printing and Pulse Laser Ablation Deposition (PLAD) techniques. Heater, electrode, and an insulator interlayer were printed using the screen printing method on an alumina substrate, while tin oxide and platinum films, as sensing and catalyst layers, were deposited on the electrode at room temperature using the PLAD method, r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Research
سال: 2011
ISSN: 1916-9647,1916-9639
DOI: 10.5539/apr.v3n1p89