Paper‐based flexible piezoelectric nanogenerator using fibrous polymer/piezoelectric nanoparticle composite material

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Flexible Piezoelectric PZT/Fabric Composite

Flexible piezoelectric PZT/fabric composite material is pliable and tough in nature which is in a lack of traditional PZT patches. It has great application prospect in improving the sensitivity of sensor/actuator made by piezoelectric materials especially when they are used for curved surfaces or complicated conditions. In this paper, glass fiber cloth was adopted as carrier to grow PZT piezoel...

متن کامل

Piezoelectric nanogenerator using p-type ZnO nanowire arrays.

Using phosphorus-doped ZnO nanowire (NW) arrays grown on silicon substrate, energy conversion using the p-type ZnO NWs has been demonstrated for the first time. The p-type ZnO NWs produce positive output voltage pulses when scanned by a conductive atomic force microscope (AFM) in contact mode. The output voltage pulse is generated when the tip contacts the stretched side (positive piezoelectric...

متن کامل

A Flexible Sandwich Nanogenerator for Harvesting Piezoelectric Potential from Single Crystalline Zinc Oxide Nanowires

High-quality single crystalline zinc oxide nanowires were grown on silver and gold coated plastic substrates for the fabrication of a sandwich-like nanogenerator using the aqueous chemical growth method. The applicability of this configuration as a nanogenerator is demonstrated by studying the harvested electrical output under mechanical deformation. Three different configurations were fabricat...

متن کامل

Highly-efficient, flexible piezoelectric PZT thin film nanogenerator on plastic substrates.

A highly-efficient, flexible piezoelectric PZT thin film nanogenerator is demonstrated using a laser lift-off (LLO) process. The PZT thin film nanogenerator harvests the highest output performance of ∼200 V and ∼150 μA·cm(-2) from regular bending motions. Furthermore, power sources generated from a PZT thin film nanogenerator, driven by slight human finger bending motions, successfully operate ...

متن کامل

Theoretical Study of the BaTiO3 Powder’s Volume Ratio’s Influence on the Output of Composite Piezoelectric Nanogenerator

The combination of the piezoelectric materials and polymer is an effective way to make the piezoelectric nanogenerator (PENG) possess both the polymer's good flexibility and ferroelectric material's high piezoelectric coefficient. The volume ratio of ferroelectric material in the composite is an important factor that determines the PENG's output performance. In this paper, the BaTiO₃/polydimeth...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Electronics Letters

سال: 2018

ISSN: 0013-5194,1350-911X

DOI: 10.1049/el.2018.0391