Parameter Identification by Inverse Modelling of Biaxial Tensile Tests for Discontinous Fiber Reinforced Polymers
نویسندگان
چکیده
منابع مشابه
Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers
To develop and optimize advanced composite materials such as glass fiber reinforced polymers (GFRPs) is an important topic for various application areas. To inspect mechanical properties of GFRPs, material engineers use interrupted in situ tensile tests. During these tests, a specimen is scanned multiple times in an industrial computed tomography (CT) device under increasing tensile loads, star...
متن کاملEffects of Fiber Length and Fiber Orientation Distributions on the Tensile Strength of Short-fiber-reinforced Polymers
This paper presents an analytical method considering the effects of fiber length and fiber orientation distributions for predicting the tensile strength (TS) of short-fiber-reinforced polymers (SFRP). Two probability density functions are used for modelling the distributions of fiber length and fiber orientation. The strength of SFRP is derived as a functiolz of fiber length and fiber orientati...
متن کاملVisual Analysis of Defects in Glass Fiber Reinforced Polymers for 4DCT Interrupted In situ Tests
Material engineers use interrupted in situ tensile testing to investigate the damage mechanisms in composite materials. For each subsequent scan, the load is incrementally increased until the specimen is completely fractured. During the interrupted in situ testing of glass fiber reinforced polymers (GFRPs) defects of four types are expected to appear: matrix fracture, fiber/matrix debonding, fi...
متن کاملAxial Compressive Strength of Reinforced Concrete Columns Wrapped with Fiber Reinforced Polymers (FRP)
This paper presents the results of a study on the axial compressive strength of columnsstrengthened with FRP wrap. The experimental part of the study included testing 6 reinforcedconcrete columns in two series. The first series comprised three similar circular reinforced concretecolumns strengthened with FRP wrap. The second series consisted of three similar square columns,two with sharp corner...
متن کاملPREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER
In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2015
ISSN: 1617-7061
DOI: 10.1002/pamm.201510168