Parameter Measurement of Reluctance Motor Including Iron Loss.
نویسندگان
چکیده
منابع مشابه
Widebandwimm Torque and Power Measurement in Reluctance Motor Drives
Wide-bandwidth measurements are necessary when testing electronically switched drfves. 7 b o dfficult pmblems are addressed the measurement of motor phase input power at low speed. with a high PWM modulation frequency and the measurement of small torque ripple (superlmposed on a large mean toque). In an electrlcdlY noisy envlronment. Extensive use Is made of dlgilal signal processing techniques...
متن کاملSwitched Reluctance Motor
Switched Reluctance Motors (SRM) have inherent advantages such as simple structure with non winding construction in rotor side, fail safe because of its characteristic which has a high tolerances, robustness, low cost with no permanent magnet in the structure, and possible operation in high temperatures or in intense temperature variations. The torque production in switched reluctance motor com...
متن کاملA Novel Disc-Type Reluctance Motor
This paper explores the theory and potential of a family of reluctance motors as well as brief review of different types of reluctance motors, motivated by the increased demands for geometric versatility and ruggedness for electric motors. This paper presents a new and novel disc type reluctance motor that has been designed built, tested, and analyzed. The magnetic circuit-based analysis shows ...
متن کاملFlux-Linkage Model Including Cross-Saturation for a Bearingless Synchronous Reluctance Motor
This paper deals with magnetic modeling of a bearingless synchronous reluctance motor. The motor under consideration includes two separate sets of three-phase windings, one for torque production and the other one for radialforce production. This paper demonstrates by means of finite-element analysis, that it is unrealistic to assume the two three-phase windings to be decoupled from one another....
متن کاملRotor Geometry Parameter Optimization of Synchronous Reluctance Motor Using Taguchi Method
In this paper the effect of rotor geometry parameters on the d-axis and q-axis inductance of synchronous reluctance machines is investigated and an optimum design parameter combination is achieved to improve the saliency ratio as well as the performance of drive system. The 2D finite-element model of synchronous reluctance machine is used to construct the Taguchi design of experiments. The leve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 1993
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.113.265