Parameter Optimization on the Fabrication of Al-10Si-0.4Mg Alloy Using Selective Laser Melting Process
نویسندگان
چکیده
منابع مشابه
Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 alloy using Selective Laser Melting**
The expansion in application of the selective laser melting (SLM) process for fabrication of new alloy materials continues. However, to date, there has been no investigation of the effect of this process on the final microstructure of ‘melt sensitive’ powder alloys such as mechanically alloyed oxide dispersion strengthened (ODS) FeCrAl. In this study commercial PM2000 powder, a ferritic ODS all...
متن کاملOn the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties
The aim of this review is to analyze and to summarize the state of the art of the processing of aluminum alloys, and in particular of the AlSi10Mg alloy, obtained by means of the Additive Manufacturing (AM) technique known as Selective Laser Melting (SLM). This process is gaining interest worldwide, thanks to the possibility of obtaining a freeform fabrication coupled with high mechanical prope...
متن کاملInfluence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting
This paper deals with various selective laser melting (SLM) processing strategies for aluminum 2618 powder in order to get material densities and properties close to conventionally-produced, high-strength 2618 alloy. To evaluate the influence of laser scanning strategies on the resulting porosity and mechanical properties a row of experiments was done. Three types of samples were used: single-t...
متن کاملCapabilities and Performances of the Selective Laser Melting Process
The current market is in a phase of accelerated process of change, that leads companies to innovate in new techniques or technologies to respond as quickly as possible to the everchanging aspects of the global environment. The economy of a country is heavily dependent on new and innovative products with very short development time. Companies, currently, have considerable success, only if they d...
متن کاملBioresorbable Implants using Selective Laser Melting
Using bioresorbable materials implants can be manufactured which dissolve in the human body and are replaced by natural bone structure. For large implants an interconnecting porous structure needs to be integrated in the implant for a good vascularisation. Using additive manufacturing technology these internal structures can be directly manufactured. The structure can be designed by consequent ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2018
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.65.383