Parametric evaluation of electrical discharge coatings on nickel-titanium shape memory alloy in deionized water
نویسندگان
چکیده
منابع مشابه
Nickel Titanium and Nickel Titanium Hafnium Shape Memory Alloy thin films
Shape Memory Alloys (SMAs) coatings of NiTi and NiTiHf have been deposited onto Si substrates using pulse DC sputtering. Coatings of NiTi with compositions containing 45 to 65 at% Ti have been fabricated by co-sputtering NiTi with Ti. NiTiHf coatings with Hf compositions ranging from 2 to 30 at% Hf have been fabricated by co-sputtering NiTi with Hf. XRD results reveal the as-deposited coatings ...
متن کاملEvaluation of Biocompatibility for Titanium-Nickel Shape Memory Alloy in Vivo and in Vitro Environments
This study was conducted to evaluate the biocompatibility of titanium-nickel shape memory alloy used as a medical implant material. The authors carried out the following electrochemical corrosion test and in vivo and in vitro biological tests for the alloy and some metal and alloys clinically used previously to compare the intensities concerned with the biological reactions, that is, (1) anodic...
متن کاملMartensite Strain Memory in the Shape Memory Alloy Nickel-Titanium Under Mechanical Cycling
This paper describes an experimental study of stress-induced martensitic phase transformation in the SMA Nickel-Titanium. The rich local thermo-mechanical interactions that underlie transformation are examined using three-dimensional Digital Image Correlation (strain fields) and infrared imaging (thermal fields). We quantify the complex local interactions between released/absorbed latent heat a...
متن کاملTitanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process
The aim of the present research is to convert bioinert surface of NiTi to bioactive and biocompatible surface. In order to develop a bioactive and corrosion resistant film on NiTi, electrophoretic deposition process was done and TiO2 particles were deposited on the NiTi surface. Suspensions including TiO2 particles were prepared using a mixture of acetone and n-butanol (0%, 30%, 60%, 80% and 10...
متن کاملImproved adhesion between nickel–titanium shape memory alloy and a polymer matrix via silane coupling agents
NiTi wires were functionalized with silane coupling agents to improve interfacial adhesion between the inorganic constituent and a host matrix for composite applications. Surface derivatization was characterized by X-ray Photoelectron Spectroscopy, and mechanical pullout tests were performed to quantify the increase in adhesion between the NiTi shape memory alloy wires and polymer matrix. Impro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Heliyon
سال: 2020
ISSN: 2405-8440
DOI: 10.1016/j.heliyon.2020.e04812