Parametric Optimization In Drilling Process Parameters For Machining Of Glass Fibre Reinforced Composites Using Grey Relational Grade Analysis
نویسندگان
چکیده
The aim of the research is to optimize drilling process parameters while glass fi bre reinforced composites using solid carbide drill by integrating response surface methodology and Taguchi technique. Drilling includes cutting speed, Feed rate point angle with three levels. responses measured against these are; material removal rate, roughness, oversize delamination factor. ANOVA analysis carried out for regression equations are developed checked its adequacy. R-squared value found be 99.40%, roughness 96.81% , over size 98.2% factor 96.46% values acceptable. Also grey relational grade coeffi cients determined they ranked. optimal parameter nally experiments validated.
منابع مشابه
Process parameters optimization on machining force and delamination factor in milling of GFRP composites using grey relational analysis
In this study, the optimization of process parameters for milling of glass fiber reinforced polymer (GFRP) composites using grey relational analysis has been investigated. Experiments are conducted using helix angle, spindle speed, feed rate, depth of cut and fiber orientation angle as typical process parameters. The grey relational analysis (GRA) is adopted to obtain grey relational grade for ...
متن کاملOptimization of Abrasive Waterjet Machining Process Parameters Using Orthogonal Array with Grey Relational Analysis
In the present work, the optimization of the abrasive water jet machining (AWJM) process parameters with multiple performance characteristics based on the orthogonal array with the grey relational analysis (GRA) has been studied. Optimization of multiple response characteristics is far more complex compared to optimization of single performance characteristic. A grey relational grade (GRG) calc...
متن کاملOptimization of ECMAP parameters in production of ultra-fine grained Al1050 strips using Grey relational analysis
Production of lightweight metals with a higher strength to weight ratio is always the main goal of researchers. In this article, equal channel multi angular pressing (ECMAP) process as one of the most appealing severe plastic deformation (SPD) methods on production of ultra-fine grained (UFG) materials studied. Two main routes A and C investigated by FEM and compared with each other from differ...
متن کاملOptimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis
Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...
متن کاملTaguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining
In modern machining process, optimization technique is used to find the optimal values of input parameters and the effect of those parameters on response variables. If response parameters are more than one, Taguchi method of optimization may give different set of optimal levels for each response. In the present study, Taguchi-grey relational approach based multi response optimization has been u...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chiang Mai Journal of Science
سال: 2022
ISSN: ['0125-2526']
DOI: https://doi.org/10.12982/cmjs.2022.091