Parametric Optimization of GTAW Welding Using Taguchi and ANOVA
نویسندگان
چکیده
منابع مشابه
Parametric Optimization of MIG Welding for MS 5986 Fe 410 using Taguchi Method
The aim of this study is to investigate the optimization process parameters for Metal inert gas welding (MIG). In the present work, bead-on -plate welds were carried out on MS 5986 Fe 410 carbon steel sheets using Gas Metal Arc Welding (GMAW) process. In this present investigation ER70S-6 solid wire having 1.2 mm diameter was used as an electrode with direct current electrode positive polarity....
متن کاملParametric Optimization of TIG Welding on Stainless Steel (202) & Mild Steel by using Taguchi Method
The main objective of industries reveal with manufacturing better quality product at low cost and increase productivity. TIG welding is most vital and common operation use for joining of two similar or dissimilar parts with heating the material or applying the pressure by using the filler material for increasing productivity with less time and cost constrain. The TIG welding parameters are the ...
متن کاملParametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm
The present investigation proposes a hybrid technique: Taguchi method, response surface methodology (RSM) and genetic algorithm (GA), to analyze, model and predict vibration and surface roughness in traverse cut cylindrical grinding of aluminum alloy. Experiments have been conducted as per L9 orthogonal array of Taguchi methodology using several levels of the grinding parameters. Analysis of va...
متن کاملWelding Parameter Optimization of Alloy Material by Friction Stir Welding using Taguchi Approach
Friction stir welding is used as a solid state joining process for soft materials such as aluminium alloys and also for hard materials like steels. It avoids many of the common problems obtained in fusion welding. In mechanical, civil, automobile, naval, and aeronautical engineering beams are widely used of the magnesium alloys for different applications and that are joined by conventional iner...
متن کاملOptimization of the Cutting Fluids and Parameters Using Taguchi and ANOVA in Milling
In this study, two different vegetable based cutting fluids developed from refined canola and sunflower oil and a commercial type semi-synthetic cutting fluid were carried out to determine optimum conditions for tool wear and forces during milling of AISI 304 austenitic stainless steel. Taguchi L9 (3) orthogonal array was used for the experiment plan. Cutting speed, feed rate, depth of cut and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2017
ISSN: 2321-9653
DOI: 10.22214/ijraset.2017.9095