Parametric Studies of Pulsed Nd:YAG Laser Deposition of ITO for OLED Application
نویسندگان
چکیده
منابع مشابه
Pulsed laser deposition of ITO/AZO transparent contact layers for GaN LED applications.
In this study, indium-tin oxide (ITO)/Al-doped zinc oxide (AZO) composite films were fabricated by pulsed laser deposition and used as transparent contact layers (TCLs) in GaN-based blue light emitting diodes (LEDs). The ITO/AZO TCLs were composed of the thin ITO (50 nm) films and AZO films with various thicknesses from 200 to 1000 nm. Conventional LED with ITO (200 nm) TCL prepared by E-beam e...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولan application of fuzzy logic for car insurance underwriting
در ایران بیمه خودرو سهم بزرگی در صنعت بیمه دارد. تعیین حق بیمه مناسب و عادلانه نیازمند طبقه بندی خریداران بیمه نامه براساس خطرات احتمالی آنها است. عوامل ریسکی فراوانی می تواند بر این قیمت گذاری تاثیر بگذارد. طبقه بندی و تعیین میزان تاثیر گذاری هر عامل ریسکی بر قیمت گذاری بیمه خودرو پیچیدگی خاصی دارد. در این پایان نامه سعی در ارائه راهی جدید برای طبقه بندی عوامل ریسکی با استفاده از اصول و روش ها...
Pulsed Laser Deposition of SiO
Thin films of bioactive glass-ceramic have been deposited on titanium substrates by the Pulsed Laser Deposition (PLD) technique under different experimental conditions. The effect of parameters such as deposition pressure and temperature of heat treatments was studied. The microstructure and the crystalline phases of the coatings were characterized using SEM, EDX and XRD analysis; the phases pr...
متن کاملPulsed Laser Deposition of Oxides
As a materials processing technique, laser ablation was utilized for the first time in the 1960's, after the first commercial ruby laser was invented. Nevertheless, as a thin film growth method it did not attract much research interest until the late 1980 ́s, when it has been used for growing high temperature superconductor films. Since then, the development of the pulsed laser deposition (PLD) ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Review of Laser Engineering
سال: 2008
ISSN: 0387-0200,1349-6603
DOI: 10.2184/lsj.36.1242