Parasitic Effect Compensation Method for IGBT ON-State Voltage Measurement in Traction Inverter Application
نویسندگان
چکیده
This letter proposes a general compensation method to eliminate the impact of parasitic inductances on measurement accuracy on-state voltage power semiconductor devices in operating converters. It is an online and non-invasive by measuring output current inverter device only. The their are verified experimentally through traction system.
منابع مشابه
Compensation Method Eliminating Voltage Distortions in PWM Inverter
The switching lag-time and the voltage drop across the power devices cause serious waveform distortions and fundamental voltage drop in pulse width-modulated inverter output. These phenomenons are conspicuous when both the output frequency and voltage are low. To estimate the output voltage from the PWM reference signal it is essential to take account of these imperfections and to correct them....
متن کاملIgbt Inverter Circuit For Induction Heating
Induction heating is a famous technology and very filter, and a resonant inverter(8). V) this voltage enough to control of the IGBT circuit. 4IGBT. It is compared with the existing inverter topologies, half bridge and full bridge. The ordinary circuit of an AC-AC converter for induction heating typically includes a control rectifier By adjusting thewidth of the pulse that turns ON the IGBT. Abs...
متن کاملControl of Inverter-Interfaced Distributed Generation Units for Voltage and Current Harmonics Compensation in Grid-Connected Microgrids
In this paper, a new approach is proposed for voltage and current harmonics compensation in grid-connected microgrids (MGs). If sensitive loads are connected to the point of common coupling (PCC), compensation is carried out in order to reduce PCC voltage harmonics. In absence of sensitive loads at PCC, current harmonics compensation scenario is selected in order to avoid excessive injection of...
متن کاملSiC MOSFET Module Replaces up to 3x Higher Current Si IGBT Modules in Voltage Source Inverter Application
February 2013 www.bodospower.com INTRODUCTION SiC is currently the only wide bandgap material to address the power electronics market needs for high performance 1200V and 1700V devices. SiC diode technology has thrived in the market for more than a decade, and many switches have recently become available to enable “all-SiC” circuit solutions. For example, in November 2012, Cree announced the in...
متن کاملVoltage Imbalance Compensation for Droop-Controlled Inverters in Islanded Microgrid
In this paper, a new control strategy is proposed for implementation in low-voltage microgrids with balanced/ unbalanced load circumstances. The proposed scheme contains, the power droop controllers, inner voltage and current loops, the virtual impedance loop, the voltage imbalance compensation. The proposed strategy balances the voltage of the single-phase critical loads by compensating the im...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Power Electronics
سال: 2022
ISSN: ['1941-0107', '0885-8993']
DOI: https://doi.org/10.1109/tpel.2021.3130209