Partial-mediated slips in nanocrystalline Ni at high strain rate
نویسندگان
چکیده
منابع مشابه
Strain rate sensitivity of nanocrystalline Au films at room temperature
The effect of strain rate on the inelastic properties of nanocrystalline Au films was quantified with 0.85 and 1.76 lm free-standing microscale tension specimens tested over eight decades of strain rate, between 6 10 6 and 20 s . The elastic modulus was independent of the strain rate, 66 ± 4.5 GPa, but the inelastic mechanical response was clearly rate sensitive. The yield strength and the ulti...
متن کاملFinite Element Modeling of Strain Rate and Grain Size Dependency in Nanocrystalline Materials
Nanocrystalline materials show a higher strain-rate sensitivity in contrast to the conventional coarse-grained materials and a different grain size dependency. To explain these phenomenon, a finite element model is constructed that considers both grain interior and grain boundary deformation of nanocrystalline materials. The model consist of several crystalline cores with different orientations...
متن کاملHigh Hardness Nanocrystalline Invar Alloys Prepared from Fe-Ni Nanoparticles
High-density (>98% of full density) nanocrystalline invar alloys with significantly enhanced hardness (>240 in Vicker’s hardness) were prepared by sintering compacted Fe-Ni nanoparticles in hydrogen. The precursor Fe-Ni nanoparticles were synthesized by hydrogen plasma evaporation of bulk Fe61Ni39 alloys. The size and the productivity of the Fe-Ni nanoparticles increased with increasing hydroge...
متن کاملHIGH-STRENGTH NANOCRYSTALLINE Ni-W ALLOYS PRODUCED BY ELECTRODEPOSITION
Nanocrystalline Ni-W alloys having both high ductility and high strength were produced by electrodeoisition. The plating bath for the electrodeposition contained nickel sulfate, citric acid, sodium tungstate and ammonium chloride, and was operated at various bath concentrations and conditions of electrolysis. The ductility and tensile strength of the deposited alloys are strongly influenced by ...
متن کاملRecovery of strain-hardening rate in Ni-Si alloys
In this study, the recovery of strain-hardening rate (RSHR) was discovered for the first time in polycrystalline materials (Ni-Si alloys) that have only dislocation activities during tensile test. Detailed microstructure characterizations show that the activation of dislocations in the secondary slip systems during tensile deformation is the major reason for this RSHR. By taking into account ot...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Physics Letters
سال: 2007
ISSN: 0003-6951,1077-3118
DOI: 10.1063/1.2745250