Particle size distribution of sawdust and wood shavings mixtures
نویسندگان
چکیده
منابع مشابه
Characteristics of Rice Hulls, Sawdust, Wood Shavings and Mixture of Sawdust and Wood Shavings, and Their Usefulness According to the Pen Location for Hanwoo Cattle.
In this study, two experiments were conducted to investigate the physicochemical characteristics (Exp. I) of bedding materials such as rice hulls (RH), sawdust (SD), wood shavings (WS) and sawdust+wood shavings (S+W; 1:1 in volume), and utilization of these beddings except RH (Exp. II) for rearing beef cattle. In Exp. I, the distribution of particle size (%) with 250 μm and below 250 μm was gre...
متن کاملUses for Sawdust, Shavings, and Waste Chips
Although many outlets are available for the utilization of wood fines, economical disposal of sawdust, shavings, and waste chips remains a problem of growing concern to the wood industry. This report summarizes current uses for wood residues and provides sources of further information on available outlets, processing methods, and economic considerations. USES FOR SAWDUST, SHAVINGS, AND WASTE CHIPS
متن کاملParticle size distribution and particle mass measurements
Particle size distribution and particle mass measurements at urban, near-city and rural level in the Copenhagen area and Southern Sweden M. Ketzel , P. Wåhlin, A. Kristensson, E. Swietlicki, R. Berkowicz, O. J. Nielsen, and F. Palmgren Department of Atmospheric Environment, National Environmental Research Institute, Roskilde, Denmark Division of Nuclear Physics, Physics Department, Lund Univers...
متن کاملGeneration rate and particle size distribution of wood dust by handheld sanding operation
OBJECTIVES The International Agency for Research on Cancer (IARC) and Japan Society for Occupational Health (JSOH) classified wood dust as a human carcinogen. Former studies have suggested that sanding with a portable sander is one of the processes that are liable to cause highest exposure to wood dust. However, the wood dust by sanding operation has not been investigated sufficiently. In this ...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Research in Agricultural Engineering
سال: 2010
ISSN: 1212-9151,1805-9376
DOI: 10.17221/8/2010-rae