PDMS-Based Microfluidic Devices for Cell Culture
نویسندگان
چکیده
منابع مشابه
Gelatin based microfluidic devices for cell culture.
We have developed a technique for fabricating microfluidic devices from gelatin using a natural crosslinking process. Gelatin, crosslinked with the naturally occurring enzyme transglutaminase is molded to produce microchannels suitable for adherent cell culture and analysis. The autofluorescence of the material was shown to be minimal and within the range of typical background, ensuring utility...
متن کاملAdhesive-based bonding technique for PDMS microfluidic devices.
We present a simple and inexpensive technique for bonding PDMS microfluidic devices. The technique uses only adhesive tape and an oven; plasma bonders and cleanroom facilities are not required. It also produces channels that are immediately hydrophobic, allowing formation of aqueous-in-oil emulsions.
متن کاملFunctionalized glass coating for PDMS microfluidic devices
Microfluidic devices can perform multiple laboratory functions on a single, compact, and fully integrated chip. However, fabrication of microfluidic devices is difficult, and current methods, such as glass-etching or soft-lithography in PDMS, are either expensive or yield devices with poor chemical robustness. We introduce a simple method that combines the simple fabrication of PDMS with superi...
متن کاملPdms Microfluidic Devices with Ptfe Passivated Channels
PDMS microfluidic devices whose whole inner surfaces are covered with PTFE (polytetrafluoroethylene) are described. The major problems of PDMS fluidic devices in practical use, are surface degradation with organic solvents and unexpected absorption of chemical materials. In order to overcome these problems, spin/dip-coated perfluoro amorphous polymer is used to form the passivation PTFE layer o...
متن کاملPatterned cell culture inside microfluidic devices.
This paper describes a simple plasma-based dry etching method that enables patterned cell culture inside microfluidic devices by allowing patterning, fluidic bonding and sterilization steps to be carried out in a single step. This plasma-based dry etching method was used to pattern cell-adhesive and non-adhesive areas on the glass and polystyrene substrates. The patterned substrate was used for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Inventions
سال: 2018
ISSN: 2411-5134
DOI: 10.3390/inventions3030065